Drip Fittings

600 Series 1/2" Twist Lock Tee

NDS SMART LOC ELL

<p>NDS CEL 600 Nds 25/Bag .610X.640 Compression Elbow Green</p>

NDS .25" DRIP 90^ ELL BARB

<p>NDS 17MM BARB X .75" MPT</p><p>MPT - Male Pipe Thread</p>

<p>MDCF75FPT </p><p>RAIN BIRD </p><p>3/4” FPT BY COMPRESSION ADAPTER FOR EASY FIT FITTING</p>

800 Series 3/4" Twist Lock to 3/4" MPT Thread Adaptor

600 Series 1/2" Twist Lock to 3/4" MPT Thread Adaptor

600 Series 1/2" Twist Lock Elbow

Tan Pressure Compensating Module 10-32 Threaded 5.0 GPH

<ul><li><p>NDS 733-12</p></li><li><p>Adapter IPS Spigot x 1.25"</p></li></ul>

<p>NDS .75" FPT X .75" MPT 20PSI PRESSURE REG 0.2-10GPM</p><p></p><p>The "NDS .75" FPT X .75" MPT 20 PSI Pressure Reg 0.2-10 GPM" is a pressure regulator used in irrigation systems with 0.75-inch female pipe thread on one end and 0.75-inch male pipe thread on the other end. It is designed to regulate the water pressure in the system to a maximum of 20 PSI, and can handle a flow rate range of 0.2-10 GPM.</p>

<p>NDS 1/8" DRIP COUP BARB BAG 10</p><p>A Drip Coupling Barb is a type of fitting that is commonly used in drip irrigation systems. It is specifically designed to connect two sections of drip tubing or micro tubing together, allowing for the flow of water or nutrients to pass through the system.</p>

Nds .610X.640 Compression Coupling Green

<p>TS025WCAP </p><p>RAIN BIRD .25" TUBING STAKE W CAP</p>

<p>Hunter</p><p>TS-T-Q</p><p></p><p>90° Trio-Spray 10/32 Threaded</p>

<p>Hunter</p><p>TS-T-F</p><p></p><p>360° Trio-Spray 10/32 Threaded</p>

<p>Hunter </p><p>SD-B</p><p></p><p>360° Solo-Drip Barb</p>