Product Out of Stock
Sorry, this product is temporarily out of stock.
Weathermatic 1" Nitro Valve 110-603SA
Weathermatic 110-603SA
Write a Review Ask a question
$13.99
Temporarily Out of Stock
Quick Overview
Weathermatic 110-603SA
1" Nitro Valve
Questions? Contact our pool professionals:
Product Overview
Weathermatic 110-603SA Nitro valve diaphragm
Part 110-603SA is the replacement diaphragm for the 1 in. Weathermatic Nitro valve. It is the rubber part, not a whole valve. Swap it when a valve weeps, will not seal, or passes water with the solenoid off.
Specifications
| Part type | Replacement diaphragm (not a complete valve) |
|---|---|
| Fits | 1 in. FIPT Weathermatic Nitro / Silver Bullet valve |
| Pressure | Leak-free to 150 psi (parent Nitro valve rating) |
| Ports | Self-cleaning, resist sand and silt clogging |
How to replace it
- Shut off water and cut controller power to the zone.
- Unscrew the bonnet and lift the old diaphragm out.
- Seat the 110-603SA with the spring and vent hole in place.
- Hand-tighten the bonnet, then power up and test the zone.
Bad coil instead of a torn diaphragm? Replace the Weathermatic S20PSA solenoid instead.
Specs & Details
| Product Name | 1" Nitro Valve 110-603SA |
| Manufacturer Part Number | 110-603SA |
| Sku | TEL-581-1004 |
| UPC | 780534113536 |
Downloads
Questions & Reviews
0 reviews
Reviews
Be the first to write a review
Questions
Be the first to ask a question
California Proposition 65 Warning
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov



