Hunter WRCLIK
Wireless Rain-Clik Sensor Kit
Wireless Rain-Clik Sensor Kit with Quick Response Technology shutoff; includes:
Sensor
Receiver
Aluminum mount
Most rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system.
In that accumulation time, the system will continue to water.
This unnecessary waste runs counter to the principles of conservation-conscious municipalities, businesses, and residences.
With built-in Quick Response Technology, the Hunter Rain-Clik and Wireless Rain-Clik Sensors can command a controller to shut off right when it starts to rain.
1. Radio Antenna – Transmits a wireless signal to the receiver up to 800 ft. (275m).
2. Vent Ring – Used to adjust the reset rate or dry out time for the sensors.
3. Vents
4. Manual Test Spindle – Press and hold the manual test spindle to confirm proper operation of your transmitter.
5. Mounting Arm – Metal extension arm for mounting the sensor.
1. Bypass Button – Allows automatic or manual watering when the sensor is active.
2. Sensor Bypass LED – Indicates when sensor has been bypassed.
3. Sensor Status LED – Used to indicate the status of the sensor.
4. Radio Antenna – Receives a wireless signal from the transmitter up to 800 ft.
5. AC Power Wires – The two yellow wires are attached to a 24 VAC source from the controller.
6. Sensor Wires – The sensor wires are attached to either the sensor terminals in the controller or in-line with the valve common wire.
Product Name | WRCLIK, Wireless Rain-Clik Sensor Kit |
Manufacturer Part Number | WRCLIK |
Sku | HUN-58-0046 |
UPC | 0611698160053 |
Your order means a lot to us. That’s why we offer safe and reliable delivery options.
Shipping PolicyCalifornia Proposition 65 Warning
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov