Hunter I-40-04-SS-ON; I-40 Rotor, 4", full-circle, with opposing nozzle, 1" inlet, stainless steel riser, check valve, six nozzles included
Hunter I4004SSON
Hunter I-40-04-SS-ON
(i40-04-SS-ON)
I-40 Rotor, 4", full-circle, with opposing nozzle, 1" inlet, stainless steel riser, check valve, six nozzles included
Product Overview
Hunter I-40-04-SS-ON Full-Circle Rotor with Opposing Nozzle
The Hunter I-40 is the big gear-drive rotor for large open turf. This SKU is the full-circle, opposing-nozzle build on a 4-inch stainless riser. The opposing nozzle throws a primary and a secondary stream in opposite directions, so you get long-range and close-in coverage from one head.
Specs
| Radius (opposing nozzle) | 52 to 76 ft |
|---|---|
| Arc | 360 degrees, full-circle |
| Inlet | 1 in |
| Pop-up height | 4 in |
| Pressure range | 40 to 100 PSI |
| Precipitation rate | about 0.4 in/hr |
| Nozzles included | 6 opposing nozzles per rotor |
| Riser | Stainless steel |
| Warranty | 5 years |
Opposing nozzle vs standard I-40
The opposing-nozzle build reaches 52 to 76 ft. A standard, non-opposing I-40 runs shorter at roughly 44 to 69 ft. Use the opposing nozzle on wide fields where you need both distance and even close-in fill. It needs pressure: plan for 40 PSI or more at the head.
For smaller turf that does not justify a 1-inch I-40, the Hunter I-25 stainless-riser rotor is the size down.
Specs & Details
| Product Name | I-40-04-SS-ON; I-40 Rotor, 4", full-circle, with opposing nozzle, 1" inlet, stainless steel riser, check valve, six nozzles included |
| Manufacturer Part Number | I4004SSON |
| Sku | HUN-58-1308 |
| UPC | 0611698156223 |
California Proposition 65 Warning
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov
