Armada Technologies PRO50, Activator & Multimeter

Armada Pro50 Solenoid Activator with Digital Multimeter

The Armada Pro50 activates irrigation solenoids and reads voltage and resistance from one handheld unit. It is the Pro48 plus a built-in auto-ranging digital multimeter.

• Activates AC and DC solenoids: standard 24 VAC circuits and 9 VDC latching solenoids
• Built-in auto-ranging digital multimeter
• Voltage range to 40V; resistance to 40 kilohms
• Sends tone signals to trace and confirm individual wires
• Verifies controller outputs, wiring continuity, and valve operation
• Interchangeable standard electrical test leads included

When to reach for the Pro50

Use the Pro50 when you want a reading, not just a light. Check a solenoid's resistance to tell a good coil from a failed one. Confirm the controller is putting out 24V. Trace a wire back to a break with the tone, then measure continuity to prove the fix. It does the diagnostic work of a separate meter and an activator in one hand.

Pro50 vs Pro48

The Armada Pro48 activates, chatters, and traces with LED indicators only. The Pro50 adds the digital multimeter (40V / 40 kohm) for exact readings. If you troubleshoot wiring and coils all day, the Pro50 earns its keep.